The iJoy RDTA Box Mini 100W Starter Kit is a compact and versatile device in which iJoy has integrated a miniature version of their classic RDTA into a powerful chassis with built in battery. A predecessor to the popular RDTA Box 200w, the RDTA Box Mini has improved tank seals and a built in 2600 mah LiPo battery packed into a housing that is a fraction of the size of the original.

iJoy brings back the Paisley design on the 22mm cap of the RDTA Mini and features a dual adjustable 10mm by 2mm airflow system. The RDTA Box Mini utilizes RBM-C2 0.25 ohm coils which can be ran 30 to 60W and also includes a two post rebuildable deck. Both deck options are wicked downward into the reservoir and utilize the brass collar to hold the wicks in place.

The reservoir can be filled from an independent 10mm fill hole which is accessed by removing the threaded fill plug and e-juice levels can be seen through the side viewing window. The versatility of the RDTA Box Mini continues with its ability to be ran as a standard box mod by removing the RBM Deck or Coil, emptying the tank reservoir, and using the RBM connection as a standard 510 connection.

The RDTA Box Mini features a new IWEPAL powered chipset capable of 5 to 100W of output across four output modes, full temperature control support, and a vibrant, vertically stacked 0.96 inch OLED screen. This device also has an on board micro USB for both 1.0A charging and firmware upgrade. Unrivaled in capacity and versatility while packing in a 95% Power Efficient IWEPAL chipset capable of up to 100W, iJoy's RDTA Box Mini 100W Starter Kit entrenches itself as this year's ultimate compact all in one system.

• 5 to 100W Output
  • 0.05 to 3.0 ohm Minimum Atomizer Resistance
  • 1 to 8V Output
  • 1 to 30A Output
  • Four Setting Output Mode
    • Hard
    • Normal
    • Soft
    • User
      • Customized Working Waveband
  • Firmware Upgradeable
  • 95% Power Efficiency
• Temperature Control Suite
  • Ni200 Nickel Support
  • Titanium Support
  • Stainless Steel Support
  • Adjustable Initial Resistance
  • TCR Mode
    • Two Bank Memory
  • 300 to 600 Degrees Fahrenheit Output Range
  • 0.05 to 3.0 ohm Atomizer Resistance Range
• 0.96" OLED Screen
  • Vertically Stacked Matrix
  • Output Wattage and Temperature
  • Output Voltage
  • Mode and Heating Element
  • Atomizer Resistance
  • Output Current
  • Battery Life Indicator
  • Rotating Screen
  • Atomizer Resistance
  • LED Light Set
• Built In LiPo Battery
  • 2500 mah
  • Micro USB Charging
    • 1A Charge Rate
• Integrated Combo RDTA Platform
  • RBM Interchangeable Build Deck System
    • RBM Deck
      • Two Post
        • Dual Terminal Per Post
        • 2.5mm Diameter per Terminal
        • Side Mounted Phillips Screws
      • Dual Coil Compatible
      • Quad Wicking Ports
        • Sidewall Cutouts
    • RBM Coil 0.25 ohm
      • Prebuilt Sub-Ohm Coil
      • Ceramic Deck
      • 30 to 60W
      • Organic Cotton Wicking
• Full Range Tank Reservoir
  • 6.0ml Tank Capacity
  • Top Fill Design
    • Dedicated Threaded Fill Port
    • 10mm Diameter
    • Pour to Fill
• Dual Adjustable Airflow
  • 10mm by 2mm Each Airslot
  • 10mm Wide Bore Drip Tip
• Stainless Steel 510 Connector
  • Spring Loaded Brass 510 Pin
  • Able to Use as Standard 510
• PCB Temp/Low Battery/Atomizer Short/Low Resistance Protection

• 1x iJoy RDTA Box Mini 100W
• 1x RBM Deck
• 1x RBM Coil 0.25 ohm
• 1x Phillips Screwdriver
• 2x Prebuilt Clapton Coils
• 2x Strips of Organic Cotton
• 1x Spare Parts Pack
• 1x Micro USB Cable
• 1x User Manual