All Stores Open This Easter Friday

Out Of Stock

Description

Steam Crave Hadron Pro DNA250C Combo Kit consists of Steam Crave Hadron Pro DNA250C mod and Steam Crave Aromamizer Ragnar RDTA. Steam Crave Hadron Pro DNA 250C 400W Box Mod is the Steam Crave's 1st DNA 4s LiPO mod which features Evolv's DNA 250C chip with Boost and Replay function. Steam Crave Hadron Pro DNA 250C Mod is powered by LiPO 1600mah built-in battery and can fire up to 400W output. Steam Crave Hadron Pro DNA 250C Box Mod adopts 0.9 inch Full-Color TFT Screen and supports VW, VV, TC, TCR, Bypass modes to meet different needs. The integrated USB port can also easily charge the internal Li-Po 4s battery and supports firmware upgrading. Steam Crave Aromamizer Ragnar RDTA, constructed of SS & Glass, is a self-winding tank with 35mm diameter and 18ml capacity. Steam Crave Aromamizer Ragnar features adjustable smooth bottom and side airflow for medium or high power vaping(80% side airflow and 20% bottom airflow). Aromamizer Ragnar adopts postless deck with bottom honeycomb air holes. Aromamizer Ragnar RDTA is compatible with Steam Crave Aromamizer plus decks for different DIY fun due to chamber reducer.

  • First DNA 4S LiPO mod from Steam Crave
  • Evolv's DNA 250C Chipset
  • Internal LiPO 1600mah battery, max 400W output
  • Long cycle life
  • Low internal resistance
  • Safety guarantee
  • Stable discharge characteristics
  • High voltage
  • Good safety performance
  • No memory effect
  • 0.9 inch Full-Color TFT Screen
  • Support Boost and Replay function
  • VW, VV, TC, TCR, Bypass modes
  • USB Charging and Firmware Upgrading
  • Firmware Upgrade
  • Built-in Onboard Charger
  • Fast Charging
  • Pass-Through
  • On-The-Go USB
  • Atomizer Protection
  • Low Resistance Protection
  • Short Circuit Protection
  • Overheat Protection
  • Low Voltage Step Down Protection
  • Onboard Reverse Polarity Protection
  • Smooth bottom and side airflow for medium or high power vaping
  • Adjustable bottom airflow
  • Postless deck with bottom honeycomb air holes

Specifications

  • Hadron Pro DNA250C mod
  • Size: 59* 36.66* 116.1mm
  • Material: Zinc Alloy
  • Battery: built-in LiPO 1600mah battery(1600mah, 4s)
  • Output: 1-400W
  • Input Voltage: 6.0V-16.8V
  • Battery Voltage: 12V-16.8V (3.0V-4.2V, 4s)
  • Output Voltage: 0.2V-16.8V
  • Current Range: 0.5A-30A
  • Max Charging Current: 3A (2A suggested)
  • Modes: VW, VV, TC, TCR, Bypass modes
  • Screen: 0.9 inch (80*160 pixel) Full color TFT Display
  • Temperature Range: 200℉-600℉
  • Resistance Range: 0.1-3.0Ω
  • Coil Material supported: Nickel, Titanium, SS460, SS316, KA1, Ni80, Ni90
  • Aromamizer Ragnar RDTA
  • Size: 35* 58mm
  • Material: SS & Glass
  • Capacity: 18.0ml/ 25.0ml
  • Drip tip: 810 drip tip(22mm wide)
  • Thread: 510

Package Contents

1x Hadron Pro DNA 250C box mod (Evolv logo on) (equipped with 1600mAh, 4s Li-po pack)
1x USB connecting cable
1x Aromamizer ragnar RDTA(equipped with Ragnar postless deck)
1x Ragnar series deck
1x Chamber reducer(all plus V1/ V2 decks can be used with this chamber reducer)
1x 18ml glass
1x 25ml conversion chimney
2x 25ml glass
2x Coil cotton
1x Vape band
1x Allen key
1x Spare parts (O-rings and Grub Screws, Slotted Screws)
2x User manual

Your Recently Viewed Products

Product Added To Cart