The Geekvape Sonder Q Pod System Kit includes a 1000mAh battery and a 2ml cartridge capacity. It features a top-fill system for easy refilling and an adjustable airflow switch for MTL or RDL draws. The device operates without buttons and has a 3-colour LED light indicating battery status: red for below 30%, blue for 30%-60%, and green for above 60%. Safety features include overtime protection, short circuit protection, and low battery protection. The device is compatible with Q Cartridges and has a Type-C charging port.

• Size: 108.91 x 23.8mm
• Power Output: 5-20W
• Coil Resistance: 0.8ohm
• Working Temperature: -20~60C

• Size: 108.91 x 23.8mm
• Power Output: 5-20W
• Cartridge Capacity: 2ml
• Coil Resistance: 0.8ohm
• Battery Capacity: 1000mAh
• Charging Port: Type-C
• Breathing Light: 3 Colors(Green/Blue/Red)
• Battery Status Instructions: Red Light( <30%)/ Blue Light(30%-60%)/ Green Light(> 60%)
• Working Temperature: -20~60C
• Overtime Protection: If one puff is longer than 10S+1S, red light blinks 2 times, and the device stops working.
• Short Circuit Protection: Red light blinks 8 times, and the device stops working .
• Low Battery Protection: Red light blinks 5 times, ang the device enters stand-by mode after 30s.
• Compatible with Q Cartridge

• 1x Geekvape Sonder Q Device
• 1x Geekvape Q Cartridge(2ml) (Pre-installed: 0.8ohm 12-18W)